NEC TECHNOLOGIES, INC.

T-160 (CD-AT160)

Card Type               Hard drive controller
Hard Drives supported   Up to 7 SCSI devices
Floppy drives supported None
Data Bus                16-bit ISA
Card Size               Half-length, full-height

[Image]

                                CONNECTIONS

         Function             Label            Function            Label

  50-pin SCSI connector -      J2      25-pin SCSI connector -      P1
  internal                             external

                        USER CONFIGURABLE SETTINGS

               Function                   Label            Position

  »   Factory configured - do not         SW1/7          Unidentified
      alter

  »   Factory configured - do not         SW1/8          Unidentified
      alter

                           ROM ADDRESS SELECTION

        Setting               SW1/4            SW1/5           SW1/6

           C8000h              Off              Off              On

           CA000h              Off              On              Off

           CE000h              Off              On               On

           D0000h              On               Off             Off

           D4000h              On               Off              On

           D8000h              On               On              Off

           DC000h              On               On               On

  »       Disabled             Off              Off             Off

                           I/O ADDRESS SELECTION

       Setting             SW1/1             SW1/2             SW1/3

           230h              On                On               On

           240h              On                On               Off

           250h              On               Off               On

           260h              On               Off               Off

           330h             Off                On               On

           340h             Off                On               Off

           350h             Off               Off               On

  »        360h             Off               Off               Off

                            INTERRUPT SELECTION

  Setting    JP1/     JP1/     JP1/     JP1/     JP1/     JP1/      JP1/

             pins     pins     pins     pins     pins     pins      pins

             1 & 2    3 & 4    5 & 6    7 & 8    9 & 10    11 &     13 &
                                                           12        14

   IRQ3      Closed   Open     Open     Open     Open     Open      Open

   IRQ5      Open     Closed   Open     Open     Open     Open      Open

   IRQ7      Open     Open     Closed   Open     Open     Open      Open

   IRQ10     Open     Open     Open     Closed   Open     Open      Open

   IRQ12     Open     Open     Open     Open     Closed   Open      Open

   IRQ14     Open     Open     Open     Open     Open     Closed    Open

   IRQ15     Open     Open     Open     Open     Open     Open     Closed

  Disabled   Open     Open     Open     Open     Open     Open      Open